Name of the company-manufacturer.
Designation of the model.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|35 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|889 mm (millimeters)|
88.9 cm (centimeters)
35 in (inches)
2.9167 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|819.408 mm (millimeters)|
81.9408 cm (centimeters)
32.2602 in (inches)
2.6883 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|345.888 mm (millimeters)|
34.5888 cm (centimeters)
13.6176 in (inches)
1.1348 ft (feet)
|Radius of curvature|
There are curved displays, whose curve is part of a circumference (arc). In order to give more precise information about the curve of the screen, often the manufacturer provides data about the radius of this circumference. The smaller the radius, the larger the screen curve.
|1800 mm (millimeters)|
180 cm (centimeters)
70.8661 in (inches)
5.9055 ft (feet)
Name of the manufacturer of the display panel.
Information about the model of the panel used.
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|3440 x 1440 pixels|
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.238 mm (millimeters)|
0.0238 cm (centimeters)
0.0094 in (inches)
0.0008 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|106 ppi (pixels per inch)|
41 ppcm (pixels per centimeter)
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
sRGB is a color space, developed jointly by Hewlett-Packard and Microsoft in 1996. It is used in different devices such as printers, displays, TV sets, cameras, etc. The sRGB color space covers about 72% of the NTSC color space.
|100 % (percent)|
Information about the brightness of the screen. It is measured in candela per square metre (cd/m²).
|300 cd/m² (candela per square meter)|
The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene.
|2500 : 1|
The dynamic contrast shows the ratio between the brightest and the darkest color, which the display can reproduce over time, for example, in the course of playing a video.
|20000000 : 1|
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Minimum response time|
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
|4 ms (milliseconds)|
0.0040 s (seconds)
|Average response time|
Information about the average amount of time, in which the pixels change from one color to another.
|10 ms (milliseconds)|
0.0100 s (seconds)
|Maximum response time|
Information about the maximum amount of time, in which the pixels change from one color to another.
|20 ms (milliseconds)|
0.0200 s (seconds)
Desktop monitors and smart TVs experience a latency/lag in visualizing the information. The time in milliseconds that the display needs to visualize the signal input.
|6 ms (milliseconds)|
0.0060 s (seconds)
Information about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks.
Information on whether 3D is supported or not.
|Horizontal frequency (digital)|
The horizontal scan rate/frequency shows the number of horizontal lines, displayed by the monitor per second, when it is plugged to a digital source.
|30 kHz - 180 kHz (kilohertz)|
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|24 Hz - 100 Hz (hertz)|
|DisplayPort - 73 kHz - 180 kHz; 30 Hz - 120 Hz|
HDMI - 30 kHz - 140 kHz; 24 Hz - 60 Hz
DisplayPort - 3440 x 1440 @ 120 Hz
HDMI - 3440 x 1440 @ 60 Hz
Permissible voltage tolerance in a 110-volt electric system.
|100 V - 120 V (volts)|
Permissible voltage tolerance in a 220-volt electric system.
|220 V - 240 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Power consumption (off)|
Power consumption in off-mode.
|0.5 W (watts)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.5 W (watts)|
|Power consumption (eco)|
Average power consumption in economy mode.
|35 W (watts)|
|Power consumption (average)|
Average power consumption in standard work mode.
|50 W (watts)|
|Power consumption (maximum)|
The maximum possible power consumption.
|70 W (watts)|
|Width with stand|
Width with stand in different measurement units.
|847 mm (millimeters)|
84.7 cm (centimeters)
33.3465 in (inches)
2.7789 ft (feet)
|Height with stand|
Height with stand in different measurement units.
|483 mm (millimeters)|
48.3 cm (centimeters)
19.0157 in (inches)
1.5846 ft (feet)
|Depth with stand|
Depth with stand in different measurement units.
|266 mm (millimeters)|
26.6 cm (centimeters)
10.4724 in (inches)
0.8727 ft (feet)
|Weight with stand|
Weight with stand in different measurement units.
|11.8 kg (kilograms)|
26.01 lbs (pounds)
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
There are many various interfaces under the VESA standard, which differ in the size of the brackets, the distances between the screw holes and their number.
|100 x 100 mm|
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
|Height adjustment range|
Information about the extent to which the stand allows the height to be adjusted.
|110 mm (millimeters)|
11 cm (centimeters)
4.3307 in (inches)
0.3609 ft (feet)
Some displays have the ability to operate in landscape and portrait mode alike.
Information whether the display can be swiveled around the stand axis.
Maximum swivel degree of the display to the left of the stand axis.
|30 ° (degrees)|
Maximum swivel degree of the display to the right of the stand axis.
|30 ° (degrees)|
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
Maximum degree of forward tilting of the display.
|5.5 ° (degrees)|
Maximum degree of backward tilting of the display.
|28 ° (degrees)|
The speaker is a device, which converts electrical audio signals into acoustic vibrations resulting in corresponding sounds.
|2 x 2 W (watts)|
Information whether the current model has a built-in camera or not.
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|1 x USB 3.0 (downstream)|
1 x USB 3.0 (quick charge)
1 x HDMI 1.4
1 x DisplayPort 1.2
2 x 3.5 mm Audio In
1 x 3.5 mm Audio Out
Information about additional software features, technologies, functions and services of the model.
HDCP (High-bandwidth Digital Content Protection)
Low Blue Light
Nvidia G-SYNC Technology
|Certificates, standards and licenses|
List of the standards, certificates and licenses supported/received by the current model.
ENERGY STAR 7
Information about some of the main accessories included in the standard packaging of the current model.
Information about other features of the current model, which are important and have to be specified.
|Anti-theft stand lock slot - Kensington|