Name of the company-manufacturer.
Designation of the model.
Other known designations of the model.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|74.5 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|1893 mm (millimeters)|
189.3 cm (centimeters)
74.5276 in (inches)
6.2106 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|1650.24 mm (millimeters)|
165.024 cm (centimeters)
64.9701 in (inches)
5.4142 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|928.26 mm (millimeters)|
92.826 cm (centimeters)
36.5457 in (inches)
3.0455 ft (feet)
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
|10 bits (8 bits + FRC)|
Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|3840 x 2160 pixels|
Ultra HD (UHD) / 4K / 2160p
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.43 mm (millimeters)|
0.043 cm (centimeters)
0.0169 in (inches)
0.0014 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|59 ppi (pixels per inch)|
23 ppcm (pixels per centimeter)
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
Information about the brightness of the screen. It is measured in candela per square metre (cd/m²).
|200 cd/m² (candela per square meter)|
The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene.
|5000 : 1|
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Minimum response time|
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
|6 ms (milliseconds)|
0.0060 s (seconds)
Information about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks.
Information on whether 3D is supported or not.
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|60 Hz (hertz)|
Permissible voltage tolerance in a 220-volt electric system.
|220 V - 240 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Power consumption (off)|
Power consumption in off-mode.
|0.5 W (watts)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.5 W (watts)|
|Power consumption (maximum)|
The maximum possible power consumption.
|360 W (watts)|
|Energy efficiency class|
The energy efficiency class/label provides general idea about the power consumption. There are different energy efficiency classes and each sets its own requirements regarding the power consumption. Some of the existent energy efficiency classes are A+++, A++, A+, A, B, C, D, E, F, G.
|Width with stand|
Width with stand in different measurement units.
|1679 mm (millimeters)|
167.9 cm (centimeters)
66.1024 in (inches)
5.5085 ft (feet)
|Height with stand|
Height with stand in different measurement units.
|1026 mm (millimeters)|
102.6 cm (centimeters)
40.3937 in (inches)
3.3661 ft (feet)
|Depth with stand|
Depth with stand in different measurement units.
|253 mm (millimeters)|
25.3 cm (centimeters)
9.9606 in (inches)
0.8301 ft (feet)
|Weight with stand|
Weight with stand in different measurement units.
|35 kg (kilograms)|
77.16 lbs (pounds)
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
Some displays have the ability to operate in landscape and portrait mode alike.
Information whether the display can be swiveled around the stand axis.
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
|Stand width - 1577 mm|
Information about the TV tuners, which the current model is equipped with.
The speaker is a device, which converts electrical audio signals into acoustic vibrations resulting in corresponding sounds.
|2 x 10 W (watts)|
Information whether the current model has a built-in camera or not.
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|2 x USB 2.0|
1 x HDMI 2.0 (ARC; CEC)
2 x HDMI 2.0 (CEC)
1 x D-sub
1 x SCART
1 x AV Composite In 3.5 mm jack
1 x Video Component In 3.5 mm jack
1 x Optical Audio Out
1 x 3.5 mm Audio Out
1 x Antenna (RF) (female)
1 x CI+ 1.3
Information about additional software features, technologies, functions and services of the model.
|HDCP (High-bandwidth Digital Content Protection) 2.2|
|Image file formats|
Information about some of the main image file formats supported by the current model.
|Audio file formats/codecs|
Information about some of the main audio file formats/codecs supported by the current model.
|AAC (Advanced Audio Coding)|
AC3 / AC-3
MP3 (MPEG-2 Audio Layer II, .mp3)
WMA (Windows Media Audio, .wma)
WAV (Waveform Audio File Format, .wav, .wave)
|Video file formats/codecs|
Information about some of the main video file formats/codecs supported by the current model.
|3GPP (3rd Generation Partnership Project, .3gp)|
AVI (Audio Video Interleaved, .avi)
ASF (Advanced Systems Format, .asf .wma .wmv)
H.264 / MPEG-4 Part 10 / AVC video
H.265 / MPEG-H Part 2 / HEVC
MKV (Matroska Multimedia Container, .mkv .mk3d .mka .mks)
QuickTime (.mov, .qt)
MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)
WMV (Windows Media Video, .wmv)
WMV9 (Windows Media Video 9, .wmv)
The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely.
|5 °C - 35 °C (degrees Celsius)|
41 °F - 95 °F (degrees Fahrenheit)