Name of the company-manufacturer.
Name of the series, which the model belongs to.
Designation of the model.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|64.5 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|1639 mm (millimeters)|
163.9 cm (centimeters)
64.5276 in (inches)
5.3773 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|1428.48 mm (millimeters)|
142.848 cm (centimeters)
56.2394 in (inches)
4.6866 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|803.52 mm (millimeters)|
80.352 cm (centimeters)
31.6346 in (inches)
2.6362 ft (feet)
Name of the manufacturer of the display panel.
Information about the model of the panel used.
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|3840 x 2160 pixels|
Ultra HD (UHD) / 4K / 2160p
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.372 mm (millimeters)|
0.0372 cm (centimeters)
0.0146 in (inches)
0.0012 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|68 ppi (pixels per inch)|
26 ppcm (pixels per centimeter)
The percentage of the approximate area, taken by the active part of the screen, to the total front area.
|85.76 % (percent)|
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
|Direct LED (Full-Array Local Dimming)|
The NTSC (1953) color space is introduced in 1953 by the FCC with the appearance of color television and has a wider gamut than the sRGB.
|72 % (percent)|
The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene.
|4000 : 1|
The dynamic contrast shows the ratio between the brightest and the darkest color, which the display can reproduce over time, for example, in the course of playing a video.
|1000000 : 1|
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Minimum response time|
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
|5.5 ms (milliseconds)|
0.0055 s (seconds)
Desktop monitors and smart TVs experience a latency/lag in visualizing the information. The time in milliseconds that the display needs to visualize the signal input.
|44 ms (milliseconds)|
0.0440 s (seconds)
Information about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks.
Information on whether 3D is supported or not.
Information about the 3D technology supported by the model.
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|120 Hz (hertz)|
Frame interpolation technologies differ according to the manufacturer and each has its own specific name.
The frame interpolation value as provided by the manufacturer. This value must not be confused with the refresh rate of the screen.
|Interpolation measurement unit|
Some manufacturers name commercially the measurement unit of their own interpolation technologies as to denote the degree of interpolation. Very often the measurement unit is an abbreviation of the frame interpolation technology in use.
Permissible voltage tolerance in a 110-volt electric system.
|100 V - 120 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.3 W (watts)|
|Power consumption (maximum)|
The maximum possible power consumption.
|369 W (watts)|
Width without stand in different measurement units.
|1492 mm (millimeters)|
149.2 cm (centimeters)
58.7402 in (inches)
4.895 ft (feet)
Height without stand in different measurement units.
|897 mm (millimeters)|
89.7 cm (centimeters)
35.315 in (inches)
2.9429 ft (feet)
Depth without stand in different measurement units.
|107 mm (millimeters)|
10.7 cm (centimeters)
4.2126 in (inches)
0.351 ft (feet)
Weight without stand in different measurement units.
|42 kg (kilograms)|
92.59 lbs (pounds)
|Width with stand|
Width with stand in different measurement units.
|1493 mm (millimeters)|
149.3 cm (centimeters)
58.7795 in (inches)
4.8983 ft (feet)
|Height with stand|
Height with stand in different measurement units.
|950 mm (millimeters)|
95 cm (centimeters)
37.4016 in (inches)
3.1168 ft (feet)
|Depth with stand|
Depth with stand in different measurement units.
|348 mm (millimeters)|
34.8 cm (centimeters)
13.7008 in (inches)
1.1417 ft (feet)
|Weight with stand|
Weight with stand in different measurement units.
|43.9 kg (kilograms)|
96.78 lbs (pounds)
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
There are many various interfaces under the VESA standard, which differ in the size of the brackets, the distances between the screw holes and their number.
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
Some displays have the ability to operate in landscape and portrait mode alike.
Information whether the display can be swiveled around the stand axis.
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
Information about the TV tuners, which the current model is equipped with.
The system-on-chip (SoC) integrates different hardware components such as CPU, GPU, memory and others.
|4K X-Reality Pro|
The speaker is a device, which converts electrical audio signals into acoustic vibrations resulting in corresponding sounds.
|2 x 10 W (watts)|
1 x 10 W (watts)
|2.1 CH down firing|
2 x Tweeter 40 mm
Woofer 50 x 100 mm
Long duct speaker
Dolby Digital Plus
Information whether the current model has a built-in camera or not.
Information about the network technologies and standards supported by the model, which allow for it to connect to and communicate with other devices.
802.11a (IEEE 802.11a-1999)
802.11b (IEEE 802.11b-1999)
802.11g (IEEE 802.11g-2003)
802.11n (IEEE 802.11n-2009)
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|3 x USB 2.0|
1 x Ethernet RJ45
4 x HDMI 2.0 (ARC; CEC; MHL)
1 x Satellite In (Main; F-type female)
1 x AV Composite In (Video + L/R)
1 x AV Component In (YPbPr + L/R)
1 x Optical Audio Out
1 x 3.5 mm Audio Out
1 x RS232 (C)
1 x IR Out
Information about additional software features, technologies, functions and services of the model.
|Backlight OFF mode|
BRAVIA Sync (HDMI-CEC)
Dynamic Backlight Control
HDCP (High-bandwidth Digital Content Protection)
X-tended Dynamic Range Pro
|Image file formats|
Information about some of the main image file formats supported by the current model.
|Audio file formats/codecs|
Information about some of the main audio file formats/codecs supported by the current model.
|M4A (MPEG-4 Audio, .m4a)|
MP3 (MPEG-2 Audio Layer II, .mp3)
WMA (Windows Media Audio, .wma)
WAV (Waveform Audio File Format, .wav, .wave)
|Video file formats/codecs|
Information about some of the main video file formats/codecs supported by the current model.
|AVI (Audio Video Interleaved, .avi)|
DivX (.avi, .divx, .mkv)
H.264 / MPEG-4 Part 10 / AVC video
H.265 / MPEG-H Part 2 / HEVC
MKV (Matroska Multimedia Container, .mkv .mk3d .mka .mks)
QuickTime (.mov, .qt)
M2TS (Blu-ray Disc Audio-Video (BDAV) MPEG-2 Transport Stream, .m2ts, .MTS)
MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)
WMV (Windows Media Video, .wmv)
|Certificates, standards and licenses|
List of the standards, certificates and licenses supported/received by the current model.
The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely.
|0 °C - 40 °C (degrees Celsius)|
32 °F - 104 °F (degrees Fahrenheit)
The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage.
|10 % - 80 % (percent)|
Information about some of the main accessories included in the standard packaging of the current model.
|2 x 3D active glasses - TDG-BT400A|
IR extender cable
Remote control - RM-YD102; RMF-YD003