Name of the company-manufacturer.
Name of the series, which the model belongs to.
Designation of the model.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|59.5 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|1511 mm (millimeters)|
151.1 cm (centimeters)
59.4882 in (inches)
4.9573 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|1316.9 mm (millimeters)|
131.69 cm (centimeters)
51.8465 in (inches)
4.3205 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|740.6 mm (millimeters)|
74.06 cm (centimeters)
29.1575 in (inches)
2.4298 ft (feet)
Name of the manufacturer of the display panel.
Information about the model of the panel used.
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|1920 x 1080 pixels|
Full HD / 1080p
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.686 mm (millimeters)|
0.0686 cm (centimeters)
0.027 in (inches)
0.0023 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|37 ppi (pixels per inch)|
14 ppcm (pixels per centimeter)
The percentage of the approximate area, taken by the active part of the screen, to the total front area.
|90.35 % (percent)|
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
Information on whether 3D is supported or not.
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|50 Hz / 60 Hz (hertz)|
Frame interpolation technologies differ according to the manufacturer and each has its own specific name.
The frame interpolation value as provided by the manufacturer. This value must not be confused with the refresh rate of the screen.
Permissible voltage tolerance in a 110-volt electric system.
|100 V - 120 V (volts)|
Permissible voltage tolerance in a 220-volt electric system.
|220 V - 240 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Electric current (A)|
Requirement regarding the electric current rating in amperes (A) of the electric system.
|1.5 A (amperes)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.3 W (watts)|
|Power consumption (maximum)|
The maximum possible power consumption.
|150 W (watts)|
Width without stand in different measurement units.
|1363 mm (millimeters)|
136.3 cm (centimeters)
53.6614 in (inches)
4.4718 ft (feet)
Height without stand in different measurement units.
|792 mm (millimeters)|
79.2 cm (centimeters)
31.1811 in (inches)
2.5984 ft (feet)
Depth without stand in different measurement units.
|55.9 mm (millimeters)|
5.59 cm (centimeters)
2.2008 in (inches)
0.1834 ft (feet)
Weight without stand in different measurement units.
|24.1 kg (kilograms)|
53.13 lbs (pounds)
|Width with stand|
Width with stand in different measurement units.
|1363 mm (millimeters)|
136.3 cm (centimeters)
53.6614 in (inches)
4.4718 ft (feet)
|Height with stand|
Height with stand in different measurement units.
|844 mm (millimeters)|
84.4 cm (centimeters)
33.2283 in (inches)
2.769 ft (feet)
|Depth with stand|
Depth with stand in different measurement units.
|294 mm (millimeters)|
29.4 cm (centimeters)
11.5748 in (inches)
0.9646 ft (feet)
|Weight with stand|
Weight with stand in different measurement units.
|29.3 kg (kilograms)|
64.6 lbs (pounds)
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
There are many various interfaces under the VESA standard, which differ in the size of the brackets, the distances between the screw holes and their number.
|300 x 300 mm|
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
Some displays have the ability to operate in landscape and portrait mode alike.
Information whether the display can be swiveled around the stand axis.
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
Information about the TV tuners, which the current model is equipped with.
The system-on-chip (SoC) integrates different hardware components such as CPU, GPU, memory and others.
The main function of the processor (CPU) is to interpret and carry out instructions, thus allowing the functioning of the operating system and the software applications.
The software instructions are performed by the CPU cores. The higher number of cores allows for the parallel (simultaneous) processing of more instructions and achieving higher performance. There are various processors equipped with 1, 2, 4, 6, 8, and more cores.
The clock rate/frequency of the CPU is measured in megahertz (MHz) or gigahertz (GHz) and indicates its working speed. Within one cycle or tick the processor may perform a varied number of instructions.
|1000 MHz (megahertz)|
The GPU processes computer graphics calculations. It is actively used in games, video decoding/playing, user interface visualization and so on. Its parallel architecture allows for its usage in specific calculations, which are processed more effectively by the GPU than by the CPU.
|PowerVR SGX543 MP2|
Similar to the CPU, the GPU may have more than one core, which serve for the parallel computing of various tasks and achieving better performance with various software applications.
The clock rate/frequency of the contemporary GPUs is measured in megahertz (MHz) or gigahertz (GHz) and indicates their level of performance.
|266 MHz (megahertz)|
The random-access memory (RAM) is used by the operating system and the software applications installed. Usually, more RAM provides better performance.
|1.5 GB (gigabytes)|
|Operating system (OS)|
The operating systems of the smart TV sets feature interactive user interface technologies for navigation and other ways of interaction with the smart TV - installing applications, internet browsing, video calls, sharing content with other users, playing videos and music, etc.
The speaker is a device, which converts electrical audio signals into acoustic vibrations resulting in corresponding sounds.
|2 x 10 W (watts)|
Information whether the current model has a built-in camera or not.
Information about the network technologies and standards supported by the model, which allow for it to connect to and communicate with other devices.
802.11a (IEEE 802.11a-1999)
802.11b (IEEE 802.11b-1999)
802.11g (IEEE 802.11g-2003)
802.11n (IEEE 802.11n-2009)
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|3 x USB 2.0|
1 x Ethernet RJ45
3 x HDMI 1.4 (ARC; CEC; MHL)
1 x Satellite In (Main; F-type female)
1 x AV Composite In (Video + L/R)
1 x AV Component In (YPbPr + L/R)
1 x Optical Audio Out
1 x RS232 (C)
Information about additional software features, technologies, functions and services of the model.
|Active Noise Reduction|
Clear Voice II
Dynamic Clear White
Dynamic Color Enhancer
HDCP (High-bandwidth Digital Content Protection)
SIMPLINK (HDMI CEC)
Triple XD Engine
Virtual Surround Plus
|Image file formats|
Information about some of the main image file formats supported by the current model.
|Audio file formats/codecs|
Information about some of the main audio file formats/codecs supported by the current model.
|AAC (Advanced Audio Coding)|
AC3 / AC-3
aptX / apt-X
FLAC (Free Lossless Audio Codec, .flac)
M4A (MPEG-4 Audio, .m4a)
MP3 (MPEG-2 Audio Layer II, .mp3)
OGG (.ogg, .ogv, .oga, .ogx, .spx, .opus)
RealAudio (.ra, .ram)
WMA (Windows Media Audio, .wma)
|Video file formats/codecs|
Information about some of the main video file formats/codecs supported by the current model.
|AVI (Audio Video Interleaved, .avi)|
DivX (.avi, .divx, .mkv)
H.264 / MPEG-4 Part 10 / AVC video
H.265 / MPEG-H Part 2 / HEVC
MKV (Matroska Multimedia Container, .mkv .mk3d .mka .mks)
QuickTime (.mov, .qt)
MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)
|Certificates, standards and licenses|
List of the standards, certificates and licenses supported/received by the current model.
The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely.
|0 °C - 40 °C (degrees Celsius)|
32 °F - 104 °F (degrees Fahrenheit)
The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage.
|10 % - 80 % (percent)|
The storage temperature shows the range from a minimum to a maximum temperature, within which storing of the display is considered to be safe.
|-20 °C - 60 °C (degrees Celsius)|
-4 °F - 140 °F (degrees Fahrenheit)
The storage humidity shows the lower and upper humidity limit, which ensures safe storage of the display. Storing it outside these limits might damage the display.
|5 % - 85 % (percent)|