Name of the company-manufacturer.
Name of the series, which the model belongs to.
Designation of the model.
Other known designations of the model.
The year in which this model was announced.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|34 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|863.6 mm (millimeters)|
86.36 cm (centimeters)
34 in (inches)
2.8333 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|797.22 mm (millimeters)|
79.722 cm (centimeters)
31.3866 in (inches)
2.6156 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|333.72 mm (millimeters)|
33.372 cm (centimeters)
13.1386 in (inches)
1.0949 ft (feet)
|Radius of curvature|
There are curved displays, whose curve is part of a circumference (arc). In order to give more precise information about the curve of the screen, often the manufacturer provides data about the radius of this circumference. The smaller the radius, the larger the screen curve.
|1000 mm (millimeters)|
100 cm (centimeters)
39.3701 in (inches)
3.2808 ft (feet)
Name of the manufacturer of the display panel.
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|3440 x 1440 pixels|
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.232 mm (millimeters)|
0.0232 cm (centimeters)
0.0091 in (inches)
0.0008 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|109 ppi (pixels per inch)|
43 ppcm (pixels per centimeter)
The percentage of the approximate area, taken by the active part of the screen, to the total front area.
|86.59 % (percent)|
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
The NTSC (1953) color space is introduced in 1953 by the FCC with the appearance of color television and has a wider gamut than the sRGB.
|72 % (percent)|
Information about the brightness of the screen. It is measured in candela per square metre (cd/m²).
|250 cd/m² (candela per square meter)|
Often even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc.
|330 cd/m² (candela per square meter)|
The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene.
|2500 : 1|
HDR expands the contrast ratio (peak luminance and minimal black levels) and color palette to achieve more details across the whole image - from the darkest parts to the brightest ones, which results in more realistic and life-like image.
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Minimum response time|
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
|6 ms (milliseconds)|
0.0060 s (seconds)
Desktop monitors and smart TVs experience a latency/lag in visualizing the information. The time in milliseconds that the display needs to visualize the signal input.
|4 ms (milliseconds)|
0.0040 s (seconds)
Information about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks.
|Response time - 1 ms (MPRT - Motion Picture Response Time)|
Information on whether 3D is supported or not.
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|48 Hz - 165 Hz (hertz)|
Permissible voltage tolerance in a 110-volt electric system.
|100 V - 120 V (volts)|
Permissible voltage tolerance in a 220-volt electric system.
|220 V - 240 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Power consumption (off)|
Power consumption in off-mode.
|0.3 W (watts)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.5 W (watts)|
|Power consumption (average)|
Average power consumption in standard work mode.
|38 W (watts)|
|Power consumption (maximum)|
The maximum possible power consumption.
|50 W (watts)|
|Power consumption (annual)|
Estimated power consumption per year in kWh.
|55 kWh (kilowatt-hours)|
|Energy efficiency class|
The energy efficiency class/label provides general idea about the power consumption. There are different energy efficiency classes and each sets its own requirements regarding the power consumption. Some of the existent energy efficiency classes are A+++, A++, A+, A, B, C, D, E, F, G.
Width without stand in different measurement units.
|806.6 mm (millimeters)|
80.66 cm (centimeters)
31.7559 in (inches)
2.6463 ft (feet)
Height without stand in different measurement units.
|380.9 mm (millimeters)|
38.09 cm (centimeters)
14.9961 in (inches)
1.2497 ft (feet)
Depth without stand in different measurement units.
|152.7 mm (millimeters)|
15.27 cm (centimeters)
6.0118 in (inches)
0.501 ft (feet)
Weight without stand in different measurement units.
|5.2 kg (kilograms)|
11.46 lbs (pounds)
|Width with stand|
Width with stand in different measurement units.
|806.6 mm (millimeters)|
80.66 cm (centimeters)
31.7559 in (inches)
2.6463 ft (feet)
|Height with stand|
Height with stand in different measurement units.
|475.3 mm (millimeters)|
47.53 cm (centimeters)
18.7126 in (inches)
1.5594 ft (feet)
|Depth with stand|
Depth with stand in different measurement units.
|272.6 mm (millimeters)|
27.26 cm (centimeters)
10.7323 in (inches)
0.8944 ft (feet)
|Weight with stand|
Weight with stand in different measurement units.
|5.6 kg (kilograms)|
12.35 lbs (pounds)
Width of the package in different measurement units.
|901 mm (millimeters)|
90.1 cm (centimeters)
35.4724 in (inches)
2.956 ft (feet)
Height of the package in different measurement units.
|441 mm (millimeters)|
44.1 cm (centimeters)
17.3622 in (inches)
1.4469 ft (feet)
Depth of the package in different measurement units.
|216 mm (millimeters)|
21.6 cm (centimeters)
8.5039 in (inches)
0.7087 ft (feet)
Weight of the product with all accessories and packaging in different measurement units.
|7.9 kg (kilograms)|
17.42 lbs (pounds)
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
There are many various interfaces under the VESA standard, which differ in the size of the brackets, the distances between the screw holes and their number.
|75 x 75 mm|
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
Some displays have the ability to operate in landscape and portrait mode alike.
Information whether the display can be swiveled around the stand axis.
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
Maximum degree of forward tilting of the display.
|2 ° (degrees)|
Maximum degree of backward tilting of the display.
|18 ° (degrees)|
Information whether the current model has a built-in camera or not.
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|1 x HDMI 2.0|
1 x DisplayPort 1.4
1 x 3.5 mm Audio Out
Information about additional software features, technologies, functions and services of the model.
|AMD FreeSync Premium|
Eco Saving Plus
Low Blue Light
Low Input Lag Mode
Off Timer Plus
Refresh Rate Optimizer
Screen Size Optimizer
Super Arena Gaming UX
The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely.
|10 °C - 40 °C (degrees Celsius)|
50 °F - 104 °F (degrees Fahrenheit)
The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage.
|10 % - 80 % (percent)|
Information about some of the main accessories included in the standard packaging of the current model.