Name of the company-manufacturer.
Designation of the model.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|27 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|685.8 mm (millimeters)|
68.58 cm (centimeters)
27 in (inches)
2.25 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|597.888 mm (millimeters)|
59.7888 cm (centimeters)
23.5389 in (inches)
1.9616 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|336.312 mm (millimeters)|
33.6312 cm (centimeters)
13.2406 in (inches)
1.1034 ft (feet)
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|1920 x 1080 pixels|
Full HD / 1080p
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.311 mm (millimeters)|
0.0311 cm (centimeters)
0.0123 in (inches)
0.001 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|81 ppi (pixels per inch)|
32 ppcm (pixels per centimeter)
The percentage of the approximate area, taken by the active part of the screen, to the total front area.
|88.69 % (percent)|
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
sRGB is a color space, developed jointly by Hewlett-Packard and Microsoft in 1996. It is used in different devices such as printers, displays, TV sets, cameras, etc. The sRGB color space covers about 72% of the NTSC color space.
|100 % (percent)|
|Adobe RGB (1998)|
Adobe RGB (1998) is a color space, developed by Adobe Systems in 1998. It has a wider gamut than the sRGB (mainly in the cyan-green range of colors) and is widely used in professional printing.
|73 % (percent)|
Information about the brightness of the screen. It is measured in candela per square metre (cd/m²).
|250 cd/m² (candela per square meter)|
The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene.
|1000 : 1|
The dynamic contrast shows the ratio between the brightest and the darkest color, which the display can reproduce over time, for example, in the course of playing a video.
|50000000 : 1|
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Minimum response time|
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
|4 ms (milliseconds)|
0.0040 s (seconds)
Information about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks.
Information on whether 3D is supported or not.
|Horizontal frequency (digital)|
The horizontal scan rate/frequency shows the number of horizontal lines, displayed by the monitor per second, when it is plugged to a digital source.
|30 kHz - 114 kHz (kilohertz)|
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|48 Hz - 75 Hz (hertz)|
Permissible voltage tolerance in a 110-volt electric system.
|110 V - 120 V (volts)|
Permissible voltage tolerance in a 220-volt electric system.
|220 V - 240 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Electric current (A)|
Requirement regarding the electric current rating in amperes (A) of the electric system.
|1.5 A (amperes)|
|Power consumption (off)|
Power consumption in off-mode.
|0.3 W (watts)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.3 W (watts)|
Width without stand in different measurement units.
|613.6 mm (millimeters)|
61.36 cm (centimeters)
24.1575 in (inches)
2.0131 ft (feet)
Height without stand in different measurement units.
|369.5 mm (millimeters)|
36.95 cm (centimeters)
14.5472 in (inches)
1.2123 ft (feet)
Depth without stand in different measurement units.
|51.1 mm (millimeters)|
5.11 cm (centimeters)
2.0118 in (inches)
0.1677 ft (feet)
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
There are many various interfaces under the VESA standard, which differ in the size of the brackets, the distances between the screw holes and their number.
|100 x 100 mm|
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
|Height adjustment range|
Information about the extent to which the stand allows the height to be adjusted.
|150 mm (millimeters)|
15 cm (centimeters)
5.9055 in (inches)
0.4921 ft (feet)
Some displays have the ability to operate in landscape and portrait mode alike.
Degree of pivoting the display counterclockwise.
|90 ° (degrees)|
Degree of pivoting the display clockwise.
|90 ° (degrees)|
Information whether the display can be swiveled around the stand axis.
Maximum swivel degree of the display to the left of the stand axis.
|180 ° (degrees)|
Maximum swivel degree of the display to the right of the stand axis.
|180 ° (degrees)|
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
Maximum degree of forward tilting of the display.
|5 ° (degrees)|
Maximum degree of backward tilting of the display.
|35 ° (degrees)|
The speaker is a device, which converts electrical audio signals into acoustic vibrations resulting in corresponding sounds.
|2 x 2 W (watts)|
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|4 x USB 3.2 (Type-A; Gen 1; downstream)|
1 x USB 3.2 (Type-C; Gen 1; DP Alt Mode)
1 x HDMI 1.4
1 x DisplayPort 1.2
1 x 3.5 mm Audio In
1 x 3.5 mm Audio Out
|High-bandwidth Digital Content Protection (HDCP)|
Information about additional software features, technologies, functions and services of the model.
Low Blue Light
Wide Viewing Angle
|Certificates, standards and licenses|
List of the standards, certificates and licenses supported/received by the current model.
Information about some of the main accessories included in the standard packaging of the current model.
Information about other features of the current model, which are important and have to be specified.