Name of the company-manufacturer.
Designation of the model.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|27 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|685.8 mm (millimeters)|
68.58 cm (centimeters)
27 in (inches)
2.25 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|596.736 mm (millimeters)|
59.6736 cm (centimeters)
23.4935 in (inches)
1.9578 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|335.664 mm (millimeters)|
33.5664 cm (centimeters)
13.2151 in (inches)
1.1013 ft (feet)
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|2560 x 1440 pixels|
Quad HD (QHD) / 1440p
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.233 mm (millimeters)|
0.0233 cm (centimeters)
0.0092 in (inches)
0.0008 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|109 ppi (pixels per inch)|
42 ppcm (pixels per centimeter)
The percentage of the approximate area, taken by the active part of the screen, to the total front area.
|92.6 % (percent)|
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
sRGB is a color space, developed jointly by Hewlett-Packard and Microsoft in 1996. It is used in different devices such as printers, displays, TV sets, cameras, etc. The sRGB color space covers about 72% of the NTSC color space.
|99 % (percent)|
DCI P3 is a color space, introduced in 2007 by the SMPTE. It is used in digital cinema and has a much wider gamut than the sRGB.
|85 % (percent)|
Information about the brightness of the screen. It is measured in candela per square metre (cd/m²).
|400 cd/m² (candela per square meter)|
Often even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc.
|600 cd/m² (candela per square meter)|
The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene.
|1000 : 1|
HDR expands the contrast ratio (peak luminance and minimal black levels) and color palette to achieve more details across the whole image - from the darkest parts to the brightest ones, which results in more realistic and life-like image.
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Minimum response time|
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
|5 ms (milliseconds)|
0.0050 s (seconds)
|Average response time|
Information about the average amount of time, in which the pixels change from one color to another.
|8 ms (milliseconds)|
0.0080 s (seconds)
Desktop monitors and smart TVs experience a latency/lag in visualizing the information. The time in milliseconds that the display needs to visualize the signal input.
|10 ms (milliseconds)|
0.0100 s (seconds)
Information about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks.
Information on whether 3D is supported or not.
|Horizontal frequency (digital)|
The horizontal scan rate/frequency shows the number of horizontal lines, displayed by the monitor per second, when it is plugged to a digital source.
|30 kHz - 140 kHz (kilohertz)|
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|48 Hz - 75 Hz (hertz)|
Permissible voltage tolerance in a 110-volt electric system.
|100 V - 120 V (volts)|
Permissible voltage tolerance in a 220-volt electric system.
|220 V - 240 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Electric current (A)|
Requirement regarding the electric current rating in amperes (A) of the electric system.
|1.8 A (amperes)|
|Power consumption (off)|
Power consumption in off-mode.
|0.3 W (watts)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.5 W (watts)|
|Power consumption (average)|
Average power consumption in standard work mode.
|29 W (watts)|
|Power consumption (maximum)|
The maximum possible power consumption.
|42 W (watts)|
Width without stand in different measurement units.
|610.9 mm (millimeters)|
61.09 cm (centimeters)
24.0512 in (inches)
2.0043 ft (feet)
Height without stand in different measurement units.
|354.1 mm (millimeters)|
35.41 cm (centimeters)
13.9409 in (inches)
1.1617 ft (feet)
Depth without stand in different measurement units.
|29 mm (millimeters)|
2.9 cm (centimeters)
1.1417 in (inches)
0.0951 ft (feet)
Weight without stand in different measurement units.
|4.5 kg (kilograms)|
9.92 lbs (pounds)
|Width with stand|
Width with stand in different measurement units.
|610.9 mm (millimeters)|
61.09 cm (centimeters)
24.0512 in (inches)
2.0043 ft (feet)
|Height with stand|
Height with stand in different measurement units.
|452.7 mm (millimeters)|
45.27 cm (centimeters)
17.8228 in (inches)
1.4852 ft (feet)
|Depth with stand|
Depth with stand in different measurement units.
|157.6 mm (millimeters)|
15.76 cm (centimeters)
6.2047 in (inches)
0.5171 ft (feet)
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
Some displays have the ability to operate in landscape and portrait mode alike.
Information whether the display can be swiveled around the stand axis.
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
Maximum degree of forward tilting of the display.
|5 ° (degrees)|
Maximum degree of backward tilting of the display.
|21 ° (degrees)|
Information whether the current model has a built-in camera or not.
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|2 x HDMI 2.0|
1 x 3.5 mm Audio Out
Information about additional software features, technologies, functions and services of the model.
|AMD FreeSync technology|
HDCP (High-bandwidth Digital Content Protection) 2.2
|Certificates, standards and licenses|
List of the standards, certificates and licenses supported/received by the current model.
TCO Certified Displays
The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely.
|0 °C - 40 °C (degrees Celsius)|
32 °F - 104 °F (degrees Fahrenheit)
The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage.
|10 % - 80 % (percent)|
The operating altitude shows the maximum admissible altitude, at which the display will function flawlessly. Above this level it might not operate properly and/or might seize to function.
|5000 m (meters)|
16404.2 ft (feet)
The storage temperature shows the range from a minimum to a maximum temperature, within which storing of the display is considered to be safe.
|-20 °C - 60 °C (degrees Celsius)|
-4 °F - 140 °F (degrees Fahrenheit)
The storage humidity shows the lower and upper humidity limit, which ensures safe storage of the display. Storing it outside these limits might damage the display.
|5 % - 90 % (percent)|
The storage altitude shows the maximum possible altitude for secure storing of the display. Storing it above this limit may result in damaging the display.
|12192 m (meters)|
40000 ft (feet)
Information about some of the main accessories included in the standard packaging of the current model.
Information about other features of the current model, which are important and have to be specified.
|Security lock slot|