Name of the company-manufacturer.
Designation of the model.
The year in which this model was announced.
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
|54.6 in (inches)|
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
|1388 mm (millimeters)|
138.8 cm (centimeters)
54.6457 in (inches)
4.5538 ft (feet)
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
|1209.6 mm (millimeters)|
120.96 cm (centimeters)
47.622 in (inches)
3.9685 ft (feet)
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
|680.4 mm (millimeters)|
68.04 cm (centimeters)
26.7874 in (inches)
2.2323 ft (feet)
There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
|Panel bit depth|
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms.
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
|3840 x 2160 pixels|
Ultra HD (UHD) / 4K / 2160p
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
|0.315 mm (millimeters)|
0.0315 cm (centimeters)
0.0124 in (inches)
0.001 ft (feet)
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
|80 ppi (pixels per inch)|
31 ppcm (pixels per centimeter)
DCI P3 is a color space, introduced in 2007 by the SMPTE. It is used in digital cinema and has a much wider gamut than the sRGB.
|98.5 % (percent)|
Often even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc.
|400 cd/m² (candela per square meter)|
HDR expands the contrast ratio (peak luminance and minimal black levels) and color palette to achieve more details across the whole image - from the darkest parts to the brightest ones, which results in more realistic and life-like image.
|Horizontal viewing angle|
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Vertical viewing angle|
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
|178 ° (degrees)|
|Minimum response time|
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
|0.5 ms (milliseconds)|
0.0005 s (seconds)
Information on whether 3D is supported or not.
|Vertical frequency (digital)|
The vertical frequency/refresh rate shows how many times in a second the image on the screen is refreshed.
|48 Hz - 120 Hz (hertz)|
Permissible voltage tolerance in a 110-volt electric system.
|100 V - 120 V (volts)|
Permissible voltage tolerance in a 220-volt electric system.
|220 V - 240 V (volts)|
|Alternating current frequency|
Requirement regarding the alternating current frequency in the electric system.
|50 Hz - 60 Hz (hertz)|
|Power consumption (sleep)|
Power consumption in sleep/stand by/suspend mode.
|0.5 W (watts)|
Information about the colors, in which the specific model is offered to the market.
Information about whether there is a possibility for wall mounting according to the VESA Mounting Interface Standard (MIS).
Information about whether the stand can be dismounted. Usually, this is required for wall mounting.
Information about whether the stand allows height adjustment.
Some displays have the ability to operate in landscape and portrait mode alike.
Information whether the display can be swiveled around the stand axis.
Most displays have the ability to be tilted forward and backward as to provide a more comfortable viewing position for the user.
The speaker is a device, which converts electrical audio signals into acoustic vibrations resulting in corresponding sounds.
|2 x 10 W (watts)|
Information whether the current model has a built-in camera or not.
Information about the available connectivity ports, slots and interfaces such as USB, infrared port, SD card slot, audio/video and network interfaces, etc.
|1 x USB (Type-C; upstream; DP Alt Mode)|
2 x USB 2.0 (Type-A; downstream)
2 x USB 3.0 (Type-A; downstream)
3 x HDMI 2.0
2 x DisplayPort 1.4
|High-bandwidth Digital Content Protection (HDCP) 2.2|
Information about additional software features, technologies, functions and services of the model.
AMD FreeSync technology
NVIDIA G-Sync Compatible